Kinematics JEE Main Questions 2025: Important Practice Questions with PYQs

Soham Mitra

Updated On: October 28, 2024 09:11 PM | JEE Main

Kinematics JEE Main Questions 2025 have been provided here. Candidates can access solved problems, unsolved questions, and Previous Year's Kinematics JEE Main questions. 
 

Kinematics JEE Main Questions 2025 Important Practice Questions with PYQs

Kinematics JEE Main Questions 2025: It is important for the JEE Main 2025 aspirants to be aware of the JEE Main Kinematics questions as the fundamental concepts of motion, velocity, and acceleration, are necessary for excelling in the JEE Main Physics paper. Candidates can find a minimum of 2 to 3 questions from the Kinematics chapter in the JEE Main 2025 exam. Hence, it is essential that candidates accustom themselves with the important practice questions of the Kinematics chapter for JEE Main . Candidates are advised to take a look at this article for the JEE Main Kinematics questions along with their solutions.

Quick Link:: JEE Main Application Form 2025

Latest Update- JEE Main 2025 Dates have been released by the National Testing Agency on October 28, 2024. According to the official schedule, JEE Mains 2025 will be held from January 22, 2025, to January 31, 2025. Aspirants can register and fill out the application form. The last date to fill out the application form of JEE Main 2025 is November 22, 2024. The direct link to apply for the JEE Main 2025 exam has been provided above.

Check Also: JEE Main Previous Year Question Paper

JEE Main 2025 Kinematics Important Questions

Candidates can check the practice questions for JEE Main Kinematics 2025 along with their solutions as provided in the table below.

Serial No.

Question

Solution

1.

A piece of wood of mass 0.03 kg is dropped from the top of a 100m height building. At the same time, a bullet of mass 0.02 Kg is fired vertically upward, with a velocity of 100 m/s, from the ground. The bullet gets embedded in the wood. Then the maximum height to which the combined system reaches above the top of the building before falling below is (g = 10 m/s)

  1. 10 m
  2. 30 m
  3. 20 m
  4. 40 m

Suppose both collide at the point P after time t. Time taken for the particles to collide,

t = d/vrel = 100/100 = 1s

Speed of wood just before collision =gt = 10m/s

Speed of bullet just before collision

v -gt = 100 -10 = 90 m/s

Before

0.03 kg ↓ 10 m/s

0.02 kg ↑ 90 m/s

After

↑ v

0.05 kg

Now, the conservation of linear momentum just before and after the collision

-(0.03)(10) + (0.02)(90) = (0.05)v ⇒ v = 30 m/s

The maximum height reached by the body a = v2/2g

= (30)2/2(10)

= 45 m

(100 -h) = ½ gt2 = ½ x 10 x1 ⇒h = 95 m

Height above tower = 40 m

Answer: (d)

2.

An automobile travelling at 40 km/h can be stopped at a distance of 40 m by applying brakes. If the same automobile is travelling at 80 km/h, the minimum stopping distance, in metres, is (assume no skidding)

(a) 100 m

(b) 75 m

(c) 160 m

(d) 150 m

Using v2 = u2 – 2as

0 = u2 – 2as

S = u2 /2a

S1/S2 = u12/u22

S2 = (u12/u22)S1 = (2)2(40) = 160 m

Answer: (c)

3.

An automobile travelling with a speed of 60 km/h, can brake to stop within a distance of 20 m. If the car is going twice as fast, i.e., 120 km/h, the stopping distance will be

(a) 20 m

(b) 40 m

(c) 60 m

(d) 80 m

Let a be the retardation for both the vehicles.

For automobile, v 2 = u 2 – 2as

u1 2 – 2as1 = 0

u1 2 = 2as1

Similarly for car, u2 2 = 2as2

(u2/u1)2 = s2/s1 = (120/60)2 = s2/20

S2 = 80 m

Answer: (d)

4.

If a body loses half of its velocity on penetrating 3 cm in a wooden block, then how much will it penetrate more before coming to rest?

(a) 1 cm

(b) 2 cm

(c) 3 cm

(d) 4 cm

For first part of penetration, by equation of motion,

(u/2)2 = u2 -2a(3)

3u2 = 24a ⇒ u2 = 8a …(1)

For latter part of penetration,

0= (u/2)2 -2ax

or u2 = 8ax……………(2)

From (1) and (2)

8ax = 8a x = 1 cm

Answer: (a)

5.

A cart is moving along x-direction with a velocity of 4m/s. A person on the cart, throws a stone with a velocity of 6m/s, relative to himself. In the frame of reference of the cart, the stone is thrown in y-z plane making an angle of 30° with a vertical z-axis. At the highest point of its trajectory, the stone hits an object of equal mass, hung vertically from a branch of a tree, by means of a string of length L. A completely inelastic collision occurs in which the stone gets embedded in the object. Determine:

i) the speed of the combined mass immediately after the collision with respect to an observer on the ground

ii)the length L of the string such that tension in the string becomes zero when the string becomes horizontal during the subsequent motion of the combined mass.

Answer: i) The cart is moving in x-y plane

The stone, thrown from the cart, travels in the y-z plane while the z-axis is the vertical axis. The stone makes an angle of 30° with z-axis. Its path is parabolic. At the highest point of its trajectory, the vertical velocity of the stone will be zero. The velocity of the stone is thus confined to (x, y) plane at the highest point. The velocity of the cart is along the x-axis

ii) It is given that the tension in the string becomes zero at the horizontal position. The combined mass therefore is at rest in this position. During the subsequent motion of the combined mass, the energy is conserved.

6.

For a tower of height H, a particle is thrown vertically upwards with a speed u. The time taken by the particle to hit the ground is n times that taken by it to reach the highest point of its path. The relation between H,u and n is

  1. 2gH = nu2 (n-2)
  2. gH = (n-2)u2
  3. 2gH = n2u2
  4. gH = (n – 2)2u2

Time to reach highest point = t = u/g

Time to reach ground = nt

S = ut + ½ at2

-H = u(nt) – ½ g (nt)2

2gH = nu2 (n-2)

Answer: (a)

7.

From a building, two balls A and B are thrown such that A is thrown upwards and B downwards (both vertically). If vA and vB are their respective velocities on reaching the ground, then

(a) vB > vA

(b) vA = vB

(c) vA > vB

(d) their velocities depend on their masses

Ball A projected upwards with velocity u, falls back with velocity u downwards. It completes its journey to the ground under gravity.

vA 2 = u2 + 2gh …(1)

Ball B starts with downwards velocity u and reaches ground after travelling a vertical distance h vB 2 = u2 + 2gh …(2)

From (1) and (2)

vA = vB

Answer: (b)

8.

Two identical trains are moving on rails along the equator on the earth in opposite directions with the same speed. They will exert the same pressure on the rails

False. One train is moving in the direction of the earth’s rotation and the other is moving in the opposite direction. Hence, they will exert different pressure on the rails.

9.

From a tower of height H, a particle is thrown vertically upwards with a speed u. The time taken by the particle, to hit the ground is n times that taken by it to reach the highest point of its path. The relation between H, u and n is

(a) gH = (n – 2)u2

(b) 2gH = n 2u2

(c) gH = (n – 2)2u2

(d) 2gH = nu2(n – 2)

The time taken by the particle to reach the topmost point is,

t =u/g … (1)

Time taken by the particle to reach the ground = nt

Using, s = ut + ½ at2

-H = u(nt) – ½ g(nt)2

-H = u x n (u/g) = ½ g2(u/g)2 [using (1)]

⇒-2gH = 2nu2 – n2u2

⇒ 2gH = nu2(n -2)

Answer: (d) 2gH = nu2(n – 2)

10.

Which of the following statements is false for a particle moving in a circle with a constant angular speed?

(a) The velocity vector is tangent to the circle

(b) The acceleration vector is tangent to the circle

(c) The acceleration vector points to the centre of the circle

(d) The velocity and acceleration vectors are perpendicular to each other

Answer: (b) The acceleration vector acts along the radius of the circle. The given statement is false.

11.

A particle is suspended vertically from a point O by an inextensible massless string of length L. A vertical line AB is at a distance L/8 from O as shown in figure. The object is given a horizontal velocity u. At some point, its motion ceases to be circular and eventually the object passes through the line AB. At the instant of crossing AB, its velocity is horizontal. Find u.

Answer: OP denotes string of length L. The particle starts from P with a horizontal velocity u. It travels along a circular path till Q. Then it passes the line AB. At Q, motion ceases to be circular. At C, its velocity is horizontal, where the particle crosses AB. After Q, the particle performs a projectile motion. At C, the velocity becomes horizontal. Thus C is at the highest point of projectile motion

12.

A car, starting from rest, accelerates at the rate f through a distance s, then continues at a constant speed for time t and then decelerates at the rate f/2 to come to rest. If the total distance traversed in 15 s, then

(a) s= ½ft2

(b) s= (¼)ft2

(c) s = ft

(d) s= (1/72)ft2

For the first part of the journey, s = s1,

s1 = ½ ft12………………………(1)

v = f t1 …………………………(2)

For second part of journey,

s2 = vt or s2 = f t1 t ……………(3)

For the third part of the journey,

s3 = ½(f/2)(2t1)2= ½ x ft12

s3 = 2s1 = 2s ………………….(4)

s1 + s2 + s3 =15s

Or s + ft1t + 2s = 15s

ft1t = 12 s

From (1) and (5) we get

(s/12 s )= ft12/(2 x ft1t)

Or t1 = t/6

Or s= ½ ft12

s= ½ f(t/6)2

s= ft2/72

Answer: (d) s= (1/72)ft2

13.

A ball is released from the top of a tower of height h metre. It takes T second to reach the ground. What is the position of the ball in T/3 second?

(a) (h/9)metre from the ground

(b) (7h/9) metre from the ground

(c) (8h/9) metre from the ground

(d) (17h/18) metre from the ground

Equation of motion

s= ut + gt2

h = 0 + ½ gT2

Or 2h = gT2………(1)

After T/3 sec, s = 0 +½ x g(T/3)2= gT2/18

18 s = gT2 …………(2)

From (1) and (2), 18 s = 2h

S = (h/9) m from top.

Height from ground = h – h/9 = (8h/9) m

Answer: (c)

14.

A passenger train of length 60 m travels at a speed of 80 km/hr. Another freight train of length 120 m travels at a speed of 30 km/hr. The ratio of times taken by the passenger train to completely cross the freight train when: (i) they are moving in the same direction, and (ii) in the opposite direction, is

(a) 25/11

(b) 3/2

(c) 5/2

(d) 11/5

The total distance to be travelled by train is 60 + 120 = 180 m.

When the trains are moving in the same direction, the relative velocity is v1 – v2 = 80 – 30 = 50 km hr–1.

So time taken to cross each other, t1 = 180/(50 x 103/3600) = [(18 x 18)/25] s

When the trains are moving in the opposite directions, relative velocity is |v1 – (–v2 )| = 80 + 30 = 110 km hr–1

So time taken to cross each other

t2= 180/(110 x 103/3600) = [(18 x 36)/110] s

t1/t2= [(18 x 18)/25] / [(18 x 36)/110] = 11/5

Answers: (d)

15.

A parachutist after bailing out falls 50 m without friction. When the parachute opens, it decelerates at 2 m/s2. He reaches the ground with a speed of 3 m/s. At what height, did he bail out?

(a) 293 m

(b) 111 m

(c) 91 m

(d) 182 m

Initially, the parachutist falls under gravity u 2 = 2ah = 2 × 9.8 × 50 = 980 m2s –2

He reaches the ground with speed = 3 m/s,

a = –2 m s–2 ⇒ (3)2 = u 2 – 2 × 2 × h1

9 = 980 – 4 h1

h1 = 971/4

h1 = 242.75 m

Total height = 50 + 242.75 = 292.75 = 293 m.

Related Reads

Kinematics Weightage in JEE Mains 2025 Units and Dimensions Weightage in JEE Main 2025
Kinematics JEE Main Questions 2025 Laws of Motion Weightage in JEE Mains 2025
Laws of motion JEE Main Questions 2025 JEE Main Question Paper April 2024 with Answer Key Solutions
JEE Main 2025 Exam JEE Main Preparation Tips
JEE Main Exam Pattern Work Energy and Power JEE Main Questions 2025
Work Energy and Power Weightage in JEE Main 2025 Rotational Motion Weightage in JEE Main 2025
Rotational Motion JEE Main Questions 2025 Gravitation Weightage in JEE Main 2025
Gravitation JEE Main Questions 2025 Thermodynamics Weightage in JEE Mains 2025
Thermodynamics JEE Main Questions 2025 Kinetic Theory of Gases Weightage in JEE Main 2025
Kinetic Theory of Gases JEE Main Questions 2025 Oscillation Weightage in JEE Mains 2025
Oscillation JEE Main Questions 2025 Electrostatics Weightage in JEE Main 2025
Electrostatics JEE Main Questions 2025 Current Electricity Weightage in JEE Main 2025
Current Electricity JEE Main Questions 2025 Magnetic Effects of Current Weightage in JEE Main 2025
Magnetic Effects JEE Main Questions 2025 Electromagnetic Waves Weightage in JEE Main 2025
Electromagnetic Waves JEE Main Questions 2025 -

We hope this article has been helpful for the candidates to be aware of the Kinematics JEE Main questions along with their solutions. Stay tuned to Collegedekho for the latest updates on JEE Mains 2025.

Are you feeling lost and unsure about what career path to take after completing 12th standard?

Say goodbye to confusion and hello to a bright future!

news_cta
/articles/kinematics-jee-main-questions-with-pyqs/
View All Questions

Related Questions

I don't know about fees system Can u explain?

-bhuvanUpdated on October 26, 2024 11:42 AM
  • 1 Answer
Sanjukta Deka, Content Team

Dear Candidate, 

Takshashila University offers undergraduate and postgraduate programmes to interested students. Takshashila University offers a wide range of popular degrees, including B.Tech, M.Tech, MBA, MA, BBA, B.Sc, and M.Sc. The university provides instruction in a wide range of subjects, including technology, business, and the humanities. Takshashila University provides regular, offline courses to interested students. Except for the B.Tech and B.Sc Agriculture courses, undergraduate studies at Takshashila University span three years, whereas postgraduate programmes normally last two years.

Takshashila University course fees vary according to the availability of the speciality. Takshashila University's M.Sc (Bio-Chemistry) fee structure is Rs 40,000 per …

READ MORE...

Can i get direct addmission in llyod college of engineering

-Madiha NazUpdated on October 21, 2024 04:01 PM
  • 1 Answer
Rupsa, Content Team

Dear Student,

You can get direct admission to Llyod College of Engineering provided you meet the eligibility criteria laid down by the institute. If you want to take direct admission to B.Tech courses at the UG level, you must have passed your 10+2 examination from a recognized school education board with 45% aggregate marks and Mathematics as a compulsory subject. To apply for direct admission to B.Tech 1st year in Llyod College of Engineering, you will have to register through the LIET website and fill out the Admission Enquiry Form. If you fulfil the eligibility requirements, you will be informed …

READ MORE...

I want to b.tech admission in this college

-UnknownUpdated on October 24, 2024 04:12 PM
  • 1 Answer
Rupsa, Content Team

Dear Student,

To take admission in B.Tech at Sri Venkateswara College of Engineering & Technology, Chittoor, you should have at least minimum of 50% marks in 10 + 2 Intermediate (with Mathematics, Physics & Chemistry as compulsory subjects) or A level education or equivalent. Admissions at the Sri Venkateswara College of Engineering & Technology are conducted based on the AP EAPCET scores; however, the college also accepts direct admissions based on Management Quota. For more information check the official college website.

Based on your eligibility and preferred specialization, you can get admission to core engineering branches, like Computer Science Engineering, …

READ MORE...

Do you have a question? Ask us.

  • Typical response between 24-48 hours

  • Get personalized response

  • Free of Cost

  • Access to community

Recent Articles

Recent News

Subscribe to CollegeDekho News

By proceeding ahead you expressly agree to the CollegeDekho terms of use and privacy policy

Top 10 Engineering Colleges in India

View All

Tell us your JEE Main score & access the list of colleges you may qualify for!

Predict My College
Top